100% Free & Private — audio never leaves your browser ·  Test Your Mic Now →
Test My Mic

How To Test A Condenser Mic

Asked by Zoya2 views2 answers
Operating System
Windows
Device Type
XLR
Model
Condenser microphone

How do I test a condenser mic? Not sure if it's broken or I set it up wrong.

Team Answer

Official Team Solution

Give it power first: turn on 48V phantom power for XLR condensers. Then speak 15 cm away, raise the gain slowly and watch the Mic Test meter.

Condenser microphones need power. Without phantom power, an XLR condenser gives no signal at all.

Step By Step Fix

  1. Connect the mic to your interface with an XLR cable.
  2. Turn on 48V phantom power.
  3. Raise the gain slowly while you speak.
  4. Run the Mic Test and check the peaks.
  5. Stay quiet and check the noise level is low.
Did This Fix It?

Community Answers 1

0
Mic Team ExpertsCore Testing Team

USB condenser mics get power from USB. If one shows no signal, try another cable and port first.

Add Your Answer

Answers are checked by the team before they appear. Please be kind and specific.