100% Free & Private — audio never leaves your browser ·  Test Your Mic Now →
Test My Mic

Shure SM7B Too Quiet With An Audio Interface

Asked by Mic Test Pro Team6 views1 answer
Operating System
Windows
Device Type
XLR
Model
Shure SM7B

My Shure SM7B is very quiet even with the interface gain turned almost all the way up.

Team Answer

Official Team Solution

The SM7B has low output and needs a lot of clean gain. Speak 5 to 10 cm away, max the interface gain or add an inline preamp powered by 48V.

The SM7B is a dynamic microphone with low output. Many entry level interfaces run out of gain before it reaches a healthy level, so it sounds quiet even at full volume in the operating system.

48V phantom power does not make the SM7B louder. It only powers an inline booster that sits between the microphone and the interface.

Step By Step Fix

  1. Speak 5 to 10 cm from the windscreen, straight into the front of the microphone.
  2. Turn the interface gain up until loud words reach 60% to 75% on the Mic Test meter.
  3. If the gain is at maximum and you are still too quiet, add an inline preamp such as a Cloudlifter or FetHead.
  4. Turn on 48V on the interface to power the inline preamp.
  5. Set the system input level to 100 and run the Mic Test again.
Did This Fix It?

Community Answers 0

No community answers yet. If you have fixed the same problem, share what worked below.

Add Your Answer

Answers are checked by the team before they appear. Please be kind and specific.