100% Free & Private — audio never leaves your browser ·  Test Your Mic Now →
Test My Mic

Focusrite Scarlett Solo Shows No Signal With An XLR Mic

Asked by Mic Test Pro Team0 views1 answer
Operating System
Windows
Device Type
XLR
Model
Focusrite Scarlett Solo

My XLR condenser mic is plugged into a Scarlett Solo. Windows sees the Focusrite, but the Mic Test shows a flat line.

Team Answer

Official Team Solution

Condenser mics need 48V phantom power. Turn on 48V, use the XLR mic input and raise the gain until the ring glows green when you speak.

The Scarlett Solo has one XLR input for microphones. Condenser microphones stay silent until the 48V button is on. Dynamic microphones do not need 48V but usually need much more gain.

The Solo sends the microphone on the left channel. That is normal, and most apps and the Mic Test still pick it up.

Step By Step Fix

  1. Connect the microphone to the XLR input of the Scarlett Solo with an XLR cable.
  2. Press 48V if you use a condenser microphone. Leave it off for ribbon microphones.
  3. Turn the gain knob while you speak until the ring around it glows green, with only short amber flashes on loud words.
  4. In Windows, open Settings, System, Sound and select the Focusrite as the Input.
  5. Close any recording app that may hold the interface, then run the Mic Test.
Did This Fix It?

Community Answers 0

No community answers yet. If you have fixed the same problem, share what worked below.

Add Your Answer

Answers are checked by the team before they appear. Please be kind and specific.